diff --git a/public/videos/3941-E.mp4 b/public/videos/3941-E.mp4
new file mode 100644
index 0000000..9f36b62
Binary files /dev/null and b/public/videos/3941-E.mp4 differ
diff --git a/public/videos/4217-E.mp4 b/public/videos/4217-E.mp4
new file mode 100644
index 0000000..2af5cbb
Binary files /dev/null and b/public/videos/4217-E.mp4 differ
diff --git a/public/videos/4645-E.mp4 b/public/videos/4645-E.mp4
new file mode 100644
index 0000000..e3af602
Binary files /dev/null and b/public/videos/4645-E.mp4 differ
diff --git a/public/videos/4671-E.mp4 b/public/videos/4671-E.mp4
new file mode 100644
index 0000000..9f07ee4
Binary files /dev/null and b/public/videos/4671-E.mp4 differ
diff --git a/public/videos/4730-E.mp4 b/public/videos/4730-E.mp4
new file mode 100644
index 0000000..791467f
Binary files /dev/null and b/public/videos/4730-E.mp4 differ
diff --git a/templates/Training/Safety/Topics/actionplan.html.twig b/templates/Training/Safety/Topics/actionplan.html.twig
index 8855264..0426aba 100644
--- a/templates/Training/Safety/Topics/actionplan.html.twig
+++ b/templates/Training/Safety/Topics/actionplan.html.twig
@@ -22,7 +22,7 @@ This plan was created in accordance with 29 CFR 1910.38 Subpart E in order to pr
Code Red Reporting Procedures:
The method of Emergency reporting used at J.V. Manufacturing, Inc. is an intercom system. The intercom can be accessed from any phone throughout the facility. The individual who recognizes the emergency will pick up the nearest phone and report the emergency immediately.
If a fire is identified, then employee must use his/her discretion as to whether it can be extinguished. If the fire is too large, then the coding system will be used. The following are the instructions for reporting a CODE RED:
- Pick up phone, wait for dial tone. Dial extension 634. Wait for the beep, then announce CODE RED and the building NUMBER/NAME. Hang up. phone. (Instructions are located by all phones throughout the shop.) Below is a list of the building #’s and names:
+ Pick up phone, wait for dial tone. Dial extension 634. Wait for the beep, and then announce CODE RED and the building NUMBER/NAME. Hang up. phone. (Instructions are located by all phones throughout the shop.) Below is a list of the building #’s and names:
- Office
- Building #1-DL line
@@ -33,17 +33,17 @@ This plan was created in accordance with 29 CFR 1910.38 Subpart E in order to pr
- Building-#5 Shipping office/VB Line/Machine Shop
- Paint Room/Paint Storage Area
- Receptionist will dial 911 and notify operator of the type of emergency and location. The HR department will be the back up incase receptionist is not available.
+ Receptionist will dial 911 and notify operator of the type of emergency and location. The HR department will be the backup incase receptionist is not available.
Code Red Evacuation/Employee Accountability Procedures:
- When a code red is announced over the loud speaker, all employees will need to evacuate their work areas immediately in a safe and calm manner. This means no running or joking.
- All employees are trained on their area’s evacuation exits, routes, and meeting places. Attached is the corresponding map with the evacuation routes. There are also evacuation maps throughout the facility.
+ All employees are trained on their area's evacuation exits, routes, and meeting places. Attached is the corresponding map with the evacuation routes. There are also evacuation maps throughout the facility.
All employees must meet with their supervisor and fellow employees at the designated evacuation destination.
When you reach your destination, please remain in a single file line with your department. Please DO NOT mix in with other departments.
If you are in another building when the code is sounded, it is important that you meet up with your department at the evacuation destination.
This will help with employee accountability.
-- It is the area supervisor’s responsibility to make sure that everyone in his/her department is accounted for at the evacuation destination.
+
- It is the area supervisor's responsibility to make sure that everyone in his/her department is accounted for at the evacuation destination.
If the supervisor is absent, it is the responsibility of the safety committee member for that department to account for all employees.
The plant superintendents will contact each line supervisor/safety committee member to verify status of employees.
If an employee is not accounted for, the emergency officials on site will be notified immediately for a rescue attempt.
@@ -55,13 +55,13 @@ If an employee is not accounted for, the emergency officials on site will be not
Code Yellow Evacuation/Employee Accountability Procedures:
-- When the CODE YELLOW is announced over the intercom system, all employees must proceed to their departments assigned evacuation destinations. They are as follows:
-- Building #’s 1,2,3,3a will evacuate into the Engineering/Sales Department
+- When the CODE YELLOW is announced over the intercom system, all employees must go to their departments assigned evacuation destinations. They are as follows:
+- Building #'s 1,2,3,3a will evacuate into the Engineering/Sales Department
- Building #4 will evacuate into the Install Department
- Building #5 and Paint Room will evacuate into the electric room.
- Engineering Department and Install Depart will stay in their area.
- Service Department, Accounting, and Executives will evacuate to the conference room and hallways bordering it.
-- It is the supervisor’s responsibility to make sure that everyone in his/her department is accounted for at the evacuation destination. If the supervisor is absent, it is the responsibility of the safety committee member for that department to account for all employees. The plant superintendents will contact each line supervisor/safety committee member to verify status of employees.
+- It is the supervisor's responsibility to make sure that everyone in his/her department is accounted for at the evacuation destination. If the supervisor is absent, it is the responsibility of the safety committee member for that department to account for all employees. The plant superintendents will contact each line supervisor/safety committee member to verify status of employees.
- No one is allowed to leave the evacuation area for any reason until the “all clear” signal is given by the either the Safety Coordinator or the Plant Superintendents.
@@ -71,7 +71,7 @@ If an employee is not accounted for, the emergency officials on site will be not
- Associate's responsibilities under the plan change
- Whenever the plan is changed.
- For all new Employees as part of the New Employee Safety Training.
-- Periodic drills will be performed to assure that all employees know what to do incase of an emergency.
+
- Periodic drills will be performed to assure that all employees know what to do in case of an emergency.
Persons with specific duties require additional refresher training throughout the year.
Local Emergency Services will be contacted and invited to train in conjunction with company drills.
The written plan is maintained in the workplace and made available for employee review.
diff --git a/templates/Training/Safety/Topics/electrical.html.twig b/templates/Training/Safety/Topics/electrical.html.twig
index 194bad0..ae42af4 100644
--- a/templates/Training/Safety/Topics/electrical.html.twig
+++ b/templates/Training/Safety/Topics/electrical.html.twig
@@ -3,17 +3,23 @@
Electrical Safety
-
Unqualified Employee is any employee that has not been trained, nor is licensed or authorized by management to conduct electrical work.
-
-
Electrical Safety Rules for Unqualified Employees:
+
+Qualified Employee: an employee that has been trained and is licensed or authorized by management to conduct electrical work.
+Unqualified Employee:any employee that has not been trained, nor is licensed or authorized by management to conduct electrical work.
+
+
All employees, Qualified and Unqualified, must follow these precautions:
-- Do not conduct any repairs to electrical equipment
-- Report all electrical deficiencies to your supervisor
-- Do not operate equipment if you suspect an electrical problem
-- Water and electricity do not mix
-- Even low voltages can kill or injure you
-- Do not use cords or plugs if the ground prong is missing
-- Do not over load electrical receptacles
+- Inspect work daily for such hazards as flickering lights, warm receptacles, sticking switches, burning ordors, loose connections, and damaged wires.
+
+- Report problems to your supervisor immediately.
+- Select proper cords and connections for each job, and make sure portable cords are suitable in terms of gauge size, flexibility, strength, and ability to withstand chemicals.
+- Make sure all electrical equipment is properly grounded.
+- Plug into a ground fault circuit interrupter (CFCI) in wet areas and outdoors.
+- Disconnect energy sources before performing maintenance and repairs, and lock and tag out disconnected power.
+- Don’t use a metal ladder or wear metal or metal hard hat around electricity.
+- Don’t touch anything electrified when your hands are wet, when you’re standing on a wet floor, or when you’re in contact with a wet surface.
+- Don’t overload outlets or circuits.
+- Use an ABC or CO2 fire extinguisher on electrical fires: never use water.
Electrical equipment is defined as a cord or plug type electrical device which includes the use of a flexible or extension cord.
diff --git a/templates/Training/Safety/Topics/fireprevention.html.twig b/templates/Training/Safety/Topics/fireprevention.html.twig
index 33b34f6..8eaf8c3 100644
--- a/templates/Training/Safety/Topics/fireprevention.html.twig
+++ b/templates/Training/Safety/Topics/fireprevention.html.twig
@@ -91,7 +91,7 @@
- Sound alarm (CODE RED)
- Alert fire department
- Try to put out fire only if it is small and tame
-
- When necessary, leave the fire fighting to professionals
+
- When necessary, leave the firefighting to professionals